WARNING: Make sure you flash the correct firmware! Flashing the wrong firmware might lock your bootloader preventing future flashing. If you are a Zigbee2MQTT user and don't know what to pick click the Coordinator firmware link of your adapter on: https://www.zigbee2mqtt.io/information/supported_adapters.html.
| Adapter | TI Chip/Module Used | Firmware to Flash | BSL Trigger Pin (1) | Auto-BSL (2) | RF Switch Control Pins (3) | LED(s) | Hardware Flow Control |
|---|---|---|---|---|---|---|---|
| TI LAUNCHXL-CC26xR1 | CC2652R | CC2652R_*.zip |
DIO_13 | No | N/A | DIO_6 (Red) DIO_7 (Green) |
? |
| TI LAUNCHXL-CC1352P-2 | CC1352P | CC1352P2_CC2652P_launchpad_*.zip | DIO_15 | No | DIO_28: 2.4Ghz DIO_29: 20dBm PA DIO_30: Sub-1GHz |
DIO_6 (Red) DIO_7 (Green) |
? |
| Electrolama zzh | CC2652R | CC2652R_*.zip | DIO_13 | No | N/A | DIO_7 (Pink) | ? |
| Electrolama zzhp-lite | CC2652P (Ebyte E72) |
CC1352P2_CC2652P_other_*.zip | DIO_15 | Yes | DIO_5: 20dBm PA ?? DIO_6: 2.4GHz ?? |
DIO_7 (Pink) | ? |
| Electrolama zzhp | CC2652P | CC1352P2_CC2652P_other_*.zip | DIO_15 | Yes | DIO_5: 20dBm PA ?? DIO_6: 2.4GHz ?? |
DIO_7 (Pink) | ? |
| Electrolama zoe2 | CC1352P (Ebyte E79) |
CC1352P2_CC2652P_other_*.zip | DIO_15 | No | DIO_5: 20dBm PA ?? DIO_6: 2.4GHz ?? |
DIO_7 (Pink) | ? |
| Slaesh's CC2652RB stick | CC2652RB | CC2652RB_*.zip | DIO_13 | Yes | N/A | DIO_7 (Blue) | ? |
| ZigStar Stick v4 | CC2652P (RFSTAR RF-BM-2652P2) |
CC1352P2_CC2652P_launchpad_*.zip | DIO_15 | Only for CH340C ver. | DIO_28: 2.4Ghz DIO_29: 20dBm PA |
DIO_6 (Green) DIO_7 (Red) |
? |
| CircuitSetup.us Zigbee Stick | CC2652P (RFSTAR RF-BM-2652P2 PCB Ant.) |
CC1352P2_CC2652P_launchpad_*.zip | DIO_15 | No | DIO_28: 2.4Ghz DIO_29: 20dBm PA |
DIO_6 (Green) DIO_7 (Red) |
? |
| Tube's CC2652P2 USB Coordinator |
CC2652P (RFSTAR RF-BM-2652P2) |
CC1352P2_CC2652P_launchpad_*.zip | DIO_15 | N/A | DIO_28: 2.4Ghz DIO_29: 20dBm PA |
N/A | ? |
| Tube's Zigbee Gateways (CC2652P2 variant) |
CC2652P (RFSTAR RF-BM-2652P2) |
CC1352P2_CC2652P_launchpad_*.zip | DIO_15 | N/A | DIO_28: 2.4Ghz DIO_29: 20dBm PA |
N/A | ? |
| Tube's Zigbee PoE (Power Over Ethernet) Serial Coordinator (CC2652P2 variant) |
CC2652P (RFSTAR RF-BM-2652P2) |
CC1352P2_CC2652P_launchpad_*.zip | DIO_15 | N/A | DIO_28: 2.4Ghz DIO_29: 20dBm PA |
N/A | ? |
| Egony Stick V4 (Ebyte ver.) |
CC2652P (Ebyte E72-2G4M20S1E) |
CC1352P2_CC2652P_other_*.zip | DIO_15 | Yes (from Rev.2.0) |
DIO_5: 20dBm PA DIO_6: 2.4GHz |
DIO_8 (Green) DIO_7 (Red) |
? |
| Egony Stick V4 (RFSTAR ver.) |
CC2652P (RFSTAR RF-BM-2652P2) |
CC1352P2_CC2652P_launchpad_*.zip | DIO_15 | Yes | DIO_28: 2.4Ghz DIO_29: 20dBm PA |
DIO_7 (Green) DIO_6 (Red) |
? |
| cod.m Zigbee CC2652P RPi Module | CC2652P (RFSTAR RF-BM-2652P2) |
CC1352P2_CC2652P_launchpad_*.zip | DIO_15 | No | DIO_28: 2.4Ghz DIO_29: 20dBm PA |
N/A | ? |
| cod.m ZigBee CC2652P2 TCP Coordinator | CC2652P (RFSTAR RF-BM-2652P2) |
CC1352P2_CC2652P_launchpad_*.zip | DIO_15 | No | DIO_28: 2.4Ghz DIO_29: 20dBm PA |
DIO_7 (Green) DIO_6 (Red) |
? |
| Gio-dot Z-Bee Duo with CC2652P | CC2652P (RFSTAR RF-BM-2652P2) |
CC1352P2_CC2652P_launchpad_*.zip | DIO_15 | Yes | DIO_28: 2.4Ghz DIO_29: 20dBm PA |
DIO_7 (Green) DIO_6 (Red) |
? |
| Gio-dot Z-Bee Duo with CC2652P | CC2652P (Ebyte E72-2G4M20S1E) |
CC1352P2_CC2652P_other_*.zip | DIO_15 | Yes (from Rev.2.0) |
DIO_5: 20dBm PA DIO_6: 2.4GHz |
DIO_8 (Green) DIO_7 (Red) |
? |
| cyijun OpenZ3Gateway | CC2652P (RFSTAR RF-BM-2652P2 SMA Ant.) |
CC1352P2_CC2652P_launchpad_*.zip | DIO_15 | No | DIO_28: 2.4Ghz DIO_29: 20dBm PA |
DIO_7 (Green) DIO_6 (Red) |
? |
| SONOFF Zigbee 3.0 USB Dongle Plus by ITead | CC2652P | CC1352P2_CC2652P_launchpad_*.zip | DIO_15 | Yes | DIO_29: 20dBm PA | DIO_7(Not welded) Power LED(Red) |
DIO13: TX DIO12:RC DIO19: CTS(DIP switch ON) DIO18: RTS(DIP switch ON) |